- Verify from the product tag
information that the voltage, amperage
and phase are compatible with your power supply.
|
- Make sure that the control voltage and
amperage matches that of your immersion heater.
|
- Be sure you have the proper grounding connections
to prevent the possibility of stray electric currents.
|
- Do not cut the 3 ft. flexible
armoured cable , keep cable opening
away from fumes, vapor and moisture. Cable opening
should face downward.
|
- Confirm that the heater sheath sheath material
is compatible to your tank process solution: Check
with your chemical supplier. Ask them to provide you
with an MSDS sheet for your particular process solution.
|
- Maintain proper liquid level.
Never allow liquid level to drop and
expose the heater hot zone. On a bayonet style heater
do not expose the metal tank stand - off the side
of the side of the heater.
|
|
- Do not try to by pass or tamper with the built-in
low liquid thermal protection sensor.
|
|
|
- If you are unsure of proper installation, contact
a qualified electrician or contact
us directly.
|
