| PLATING & PRINTED CIRCUIT |
Liquid Level Controls - BubbleGard™
Pneumatic Switch / SeeSaw™
Floatswitch / CLC Capacitive
BubbleGard™ Pneumatic Switch
- Audible and visual alarm
- Self contained
air supply
- 6 ft./1.8 m Flexible air hose
- Polypro sensor probes
- 2 lb. Air Pump
standard
- Non Conductive
- Not affected by
Tank Foam
- For Any Corrosive
Chemical
- Low Maintenance
Controls for heater shut off, solenoid valves, pumps and levels
alarms.
BBM2 - Single Function Control. High Level/Low with Internal
Reverse Switching Selection
BBD - Dual Probe Control. High Level/Low Level with Internal
Reverse Switching Selection Variable On-Off Span
| Model |
Max Amps |
Volts |
Probe Length |
Max Depth |
Box Dimensions
H x W |
| BBM2 |
30 |
120 |
24"
(60 cm) |
24"
(60 cm) |
6" x 6"
15.2 cm x 15.2 cm |
| BBD |
30 |
120 |
24"/36"
(60 cm/91.4 cm) |
48"
(121.9 cm) |
8" x 8"
(20.3 cm x 20.3 cm) |
- External alarm available
- TEFLON* sensor probes available
Liquid Level Controls SeeSaw™
Floatswitch
- N.C. (Normally Closed)
means electrical circuit
completed at bottom
position
- N.O (Normally Open)
means electrical circuit
open at bottom position
- Switch capacity:
10 AMPS/120V
5 AMPS/240V
See how SeeSaw™ can add extra
low-liquid protection.
When to order NO or NC
| Single Switch |
|
Dual Switch |
|
Range |
| POLYPRO |
TITANIUM |
POLYPRO |
TITANIUM |
|
| LP7 |
LT7 |
LPD7 |
LTD7 |
6"-9" |
| LP10 |
LT10 |
LPD10 |
LTD10 |
9"-13" |
| LP13 |
LT13 |
LPE13 |
LTD13 |
12"-16" |
| LP22 |
LT22 |
LPD22 |
LTD22 |
21"-25" |
Heavy Amperage SeeSaw™ Floatswitch
- "H" Series -
20 AMP, 240V capacity
| Single Switch |
|
| POLYPRO |
TITANIUM |
| LPV7 |
LTV7 |
| LPV10 |
LTV10 |
| LPV13 |
LTV13 |
| LPV22 |
LTV22 |
CLC Capacitive Level Control
- Senses liquid level
through non-metallic
tanks with thickness
to .600”
- Switches coil or
solenoid loads
up to 350 mA
(Max)(10mA/min.)
- Adjustable sensitivity
| Model |
Volts |
mA/MIN
LOAD |
mA/MAX
LOAD |
Weight |
CLC-0
Normally Open |
20-250 |
10mA |
350mA |
2 lbs.
(907.2 g) |
CLC-C
Normally Closed |
20-250 |
10mA |
350mA |
2 lbs.
(907.2 g) |
|
 |
Cleveland Process Corporation takes pride in providing the
best quality liquid level equipment available. However, any
mechanical device is subject
to failure. Cleveland Process Corporation will not be responsible
for improperly maintained liquid level controls or resulting
consequences. Regular
inspection and maintenance is required to insure proper equipment
performance.
* Registered trademark for fluoropolymer resins,
films and fibers made by DuPont
See more Plating and Printed Circuit Products
|
